You have no items in your cart.
Innovatech P32ND Parts
| Item No. | Part Number | Description | Quantity |
| 1 | 11-0035 | Washer, 3/8″ | 2 |
| 2 | 11-0040 | Split lock washer, 5/16″ | 6 |
| 3 | 11-0124 | Nut, 3/8″-16 | 2 |
| 4 | 11-0129 | Split lock washer, 3/8″ | 2 |
| 5 | 11-0132 | Hex head cap screw, 5/16″-18 x 1″ | 6 |
| 6 | 11-0136 | Hex head cap screw, 3/4″-10 x 2″ | 4 |
| 7 | 11-0256 | Hex head cap screw, 3/8″-16 x 3″ | 2 |
| 8 | 11-0287 | Shoulder screw, 3/8 dia. x 3/8 Lshoulder, 5/16″-18 threads | 2 |
| 9 | 11-0324 | Shoulder screw, 3/8 dia x 1/4 Lshoulder, 5/16″-18 threads | 2 |
| 10 | 13-0125 | V-ring seal, 225 ID x 15 W | 1 |
| 11 | 13-0266 | Spring | 2 |
| 12 | 51-0048 | Spacer ring | 1 |
| 13 | 51-0875 | Drum driver anchor | 2 |
| 14 | 96-0027 | Cutter head- Floating assy | 4 |
| 15 | 96-0279 | Motor base assy | 1 |
| 16 | 96-0280 | Drum assy | 1 |
| 17 | 96-0283 | Drum driver unit | 2 |
| 18 | see note | Electric motor | 1 |
| Item No. | Part Number | Description | Quantity |
| 1 | 11-0069 | Split lock washer, 1/4″ | 3 |
| 2 | 11-0349 | Button head socket cap screw, 1/4″-20 x 5/8″ | 3 |
| 3 | 13-0207 | Bearing (30 ID x 47 OD x 9 W) | 2 |
| 4 | 13-0212 | Yoke end, 3/8″-16 theads, 3/8 pin holes | 1 |
| 5 | 13-0334 | O-ring, 1.125 ID x .094 W | 1 |
| 6 | 13-0335 | Spring, .39 ID x .48 OD x .75 long | 1 |
| 7 | 51-0846 | Gear pulley | 1 |
| 8 | 51-0864 | Tensioner top plate | 1 |
| 9 | 53-0302 | Tensioner base build-up | 1 |
| Item No. | Part Number | Description | Quantity |
| 1 | 11-0069 | Split lock washer, 1/4″ | 12 |
| 2 | 11-0234 | Hex head cap screw,1/4″-20 x 2″ | 12 |
| 3 | 11-0259 | Flat washer, 1/4″ | 12 |
| 4 | 54-0027 | Splash guard | 1 |
| 5 | 54-0039 | Shroud (cut-out panel) | 1 |
| 6 | 96-0278 | Shroud (main cover) | 1 |
| 7 | see note | Grinder head | 1 |
| Item No. | Part Number | Description | Quantity |
| 1 | 11-0035 | Washer, 3/8″ | 7 |
| 2 | 11-0040 | Split lock washer, 5/16″ | 72 |
| 3 | 11-0069 | Split lock washer, 1/4″ | 2 |
| 4 | 11-0118 | Hex head cap screw, 5/16″-18 x 3/4″ | 5 |
| 5 | 11-0121 | Hex head cap screw, 1/4″-20 x 1″ | 4 |
| 6 | 11-0123 | Nut, 1/4″-20 | 4 |
| 7 | 11-0124 | Nut, 3/8″-16 | 2 |
| 8 | 11-0130 | Hex head cap screw, 3/8″-16 x 3/4″ | 3 |
| 9 | 11-0279-12 | Hex head cap screw, 1/4″-20 x 3/4″, Gr.8 | 6 |
| 10 | 13-0138 | Belt | 1 |
| 11 | 51-0014 | Tensioner sliding track | 2 |
| 12 | 53-0017 | Tensioner anchor | 1 |
| 13 | 96-0012 | Tensioner Sliding Unit | 1 |
| 14 | 96-0018 | Pulley (center drive) assy | 1 |
| 15 | 96-0019 | Idler (main drive) assy | 3 |
| 16 | 96-0022 | Bearing assy (motor base / drumconnection) | 1 |
| 17 | 96-0281 | Cutter head pulley assy (with top pulley) | 2 |
| 18 | 96-0282 | Cutter head pulley assy (without top pulley) | 2 |
| 19 | 96-0285 | Drum envelope | 1 |
| Item No. | Part Number | Description | Quantity |
| 1 | 11-0036 | Washer, 7/16″ | 2 |
| 2 | 11-0079 | Hex head cap screw, 7/16″-14 x 1-1/4″ | 1 |
| 3 | 11-0147 | Socket head cap screw, 3/8″-24 x 2″ | 4 |
| 4 | 11-0162 | Washer (Belleville, serrated), 3/8″(.413 ID x .630 OD) | 4 |
| 5 | 11-0320 | Washer (split-lock), 7/16″ | 1 |
| 6 | 11-0348 | Flat head socket screw, 5/16-18 x 1/2 | 3 |
| 7 | 13-0056 | Flexible coupling | 1 |
| 8 | 13-0186 | Velcro mat | 1 |
| 9 | 51-0139 | Cutter head floating head bottom plate | 1 |
| 10 | 51-0140 | Cutter head floating head top plate | 1 |
| 11 | 96-0025 | Cutter head triangle holder assy | 1 |
| Item No. | Part Number | Description | Quantity |
| 1 | 11-0120 | Flat head socket screw, 1/4″-20 x 1″ | 2 |
| 2 | 11-0140 | Flat head socket screw, 1/4″-20 x 1″ | 8 |
| 3 | 11-0141 | Socket head cap screw, 1/4″-20 x 5/8″ | 8 |
| 4 | 11-0348 | Flat head socket screw, 5/16-18 x 1/2 | 3 |
| 5 | 13-0116 | Cutter head rigid head rubber spring disc | 1 |
| 6 | 13-0118 | Cutter head polycord | 1 |
| 7 | 13-0186 | Velcro mat | 1 |
| 8 | 51-0143 | Cutter head rigid head top plate | 1 |
| 9 | 51-0144 | Cutter head rigid head polycord hub | 1 |
| 10 | 51-0145 | Cutter head rigid head polycord ring | 1 |
| 11 | 51-0146 | Cutter head rigid head bottom plate | 1 |
| 12 | 96-0025 | Cutter head triangle holder assy | 1 |
| Item No. | Part Number | Description | Quantity |
| 2 | 22-0019 | Switch (circuit breaker rotary handle) | 1 |
| 3 | 22-0050 | Contactor (32A, 3 pole, 24V coil) | 1 |
| 4 | 22-0060 | Switch (on/off) | 1 |
| 5 | 23-0055 | VFD (20HP, 480VAC, 3 phase) | 1 |
| 6 | 23-0056 | Quick-disconnect wiring connector | 1 |
| 7 | 23-0061 | Hour meter | 1 |
| 8 | 23-0077 | Circuit breaker base (with linkagemechanism 23-0076) | 1 |
| 9 | 23-0145 | Power Receptical, IEC ApplianceOutlet, Snap-In | 1 |
| 10 | 23-0146 | Transformer, 150VA dual voltageoutput | 1 |
| 11 | 23-0147 | Fuse (1A, 250 VAC, time delay) | 3 |
| 12 | 23-0148 | Fuse (1.5A, 600 VAC) | 2 |
| 13 | 25-0151 | Fan | 1 |
| 14 | 25-0153 | Ground bar | 1 |
| 15 | 25-0154 | Terminal block | 1 |
| 16 | 96-0307 | Inverter enclosure (assembled shell) | 1 |
| Item No. | Part Number | Description | Quantity |
| 1 | 13-0120 | Bearing (60x110x36.5) | 2 |
| 2 | 13-0131 | O-ring (2″ ID x 2-3/8″ OD x 3/16″ W) | 1 |
| 3 | 13-0134 | Dowel pin, 1/4″ dia. x 1″ long | 2 |
| 4 | 51-0002 | Bearing housing (cutter head, top) | 1 |
| 5 | 51-0191-6 | Cutter head pulley | 1 |
| 6 | 51-0867 | Bearing housing (cutter head,bottom) | 1 |
| Item No. | Part Number | Description | Quantity |
| 1 | 13-0120 | Bearing (60x110x36.5) | 2 |
| 2 | 13-0131 | O-ring (2″ ID x 2-3/8″ OD x 3/16″ W) | 1 |
| 3 | 13-0133 | Dowel pin, 3/16″ dia. x 5/8″ | 1 |
| 4 | 13-0134 | Dowel pin, 1/4″ dia. x 1″ long | 2 |
| 5 | 13-0144 | Retaining ring (E-style)- for 3/4″ shaft | 1 |
| 6 | 13-0208 | Bearing (20 ID x 37 OD x 9 W) | 1 |
| 7 | 13-0327 | Bearing, 30 ID x 55 OD x 13 W | 1 |
| 8 | 13-0330 | V-ring seal (1.93 ID x 2.33 OD x .35 H) | 1 |
| 9 | 51-0191-5 | Cutter head pulley (with top shaft) | 1 |
| 10 | 51-0845 | Gear pulley | 1 |
| 11 | 51-0867 | Bearing housing (cutter head, bottom) | 1 |
| 12 | 51-0868 | Bearing housing (cutter head, top) | 1 |
| Item No. | Part Number | Description | Quantity |
| 1 | O-ring, 1/8 ID x 5/16 OD x 3/32″ width | 13-0142 | 4 |
| 2 | Screw (flat head, Phillips) #10 – 24 x 5/16 | 11-0142 | 2 |
| 3 | Triangle holder base | 51-0138 | 1 |
| 4 | Triangle holder center rotator | 51-0110 | 1 |
| 5 | Triangle holder hold-down | 51-0132 | 1 |